Your cart is empty
Shop our productsWhy Portable Power Stations Matter?
Outages, Travel, Outdoors? One Portable Power Station Powers It All.
A powerless fridge. A cold cup of coffee. A dead phone.
These small interruptions can easily disrupt your day. With a portable power station, peace of mind is always within reach:
· During an outage, it's your reliable home power backup.
· On the road, it's your personal charging hub.
· At the campsite, it's your family's shared energy supply.
Wherever life takes you, BLUETTI portable power stations make life easier and safer. Trusted worldwide, they're not just emergency backup—they're an upgrade to your everyday life.

What's a Portable Power Station
Unlike a regular power bank that only charges phones, tablets, and small electronics, a portable power station can power much more—like lights, fridges, and even household appliances. It doesn't rely on fuel like a gas generator; instead, it stores energy for when you need it. Perfect for home backup, outdoor adventures, or remote work. Many models also connect to solar panels, turning it into a solar-powered generator for clean, on-the-go energy.


How It Works
Built for safety, reliability, and versatility, BLUETTI portable power stations use a LiFePO4 battery, pure sine wave inverter, and smart BMS to deliver consistent power wherever you are. With multiple outlets, they meet all your energy needs, whether at home or on the go.

What Can It Power?
With over 1,000W of output, many portable power stations can power most of your daily needs—from keeping your fridge running during an outage to brewing coffee or charging laptops outdoors.

Choosing Your Power Station
-
Elite 100 V2+200W Solar
Portable, solar-powered on the go.
-
Elite 200 V2+Charger 1
Fast charging for road trips.
-
Apex 300+B300K
120V/240V, long-lasting power.
-
Elite 30 V2+100W Solar
Solar-ready, ultra-portable power.
-
AC180+200W Solar Panel
All-day solar power, off-grid.
-
AC200L+Charger 1
Quick charge, RV-ready power.
Built Around You and Your Family


Select the Capacity That Fits Your Needs

Elite 100 V2
1,800W | 1,024Wh | LiFePO₄
Refrigerator
(150w)
Microave Oven
(1000w)
Table Lamp
(60w)
Wi-Fi Router
(10w)
Cpap Machine
(50w)
Desktop Computer
(250w)

Elite 200 V2
2,600W | 2,073.6Wh | LiFePO₄
Rv Air Conditioner
(1200w)
Rv Refrigerator
(180w)
Induction Cooker
(1000w)
Rv Ater Heater
(1400w)
Rv Tv
(80w)
Water Pump
(100w)

Apex 300
3,840W | 2,764.8Wh | LiFePO₄
Rv Air Conditioner
(1200w)
Rv Refrigerator
(180w)
Induction Cooker
(1000w)
Rv Ater Heater
(1400w)
Rv Tv
(80w)
Water Pump
(100w)

Elite 30V2
600W | 288Wh | LiFePO₄
Camping Lantern
(10w)
Smartphone
(15w)
Bluetooth Speaker
(20w)
Electric Blanket
(100w)
Projector
(150w)
Portable Coffee Maker
(600w)
How Long Can It Power?
Choose a power combo, plug in your watts, and see how long it runs.
- Elite 200 V2
- Elite 100 V2
- Apex 300
- AC180
- Elite 30 V2
- AC200L
- AC70







Make sure your device's power usage doesn't exceed the unit's max output.
Why Choose BLUETTI Portable Power Stations
Award-Winning Innovation
BLUETTI's leadership in energy storage is recognized worldwide, with honors like CES Best Home Backup Solution, Canadian CGM Editor's Choice, the Sustainable Development Award, and Japan's Home Appliance Award.

Trusted by Over 3,500,000 Users
BLUETTI serves customers in 110+ countries with 20 global offices. In 2024, we helped 280K users, processed 340K service orders, and maintained a 90% satisfaction rate. With 37 warehouses across 6 continents, our 24/7 support ensures fast, reliable service.

Record-Breaking Crowdfunding
BLUETTI has consistently set records: $6.73M+ for the AC200 in 2020, $12.28M+ for the AC500/B300S in 2022, and 2,600+ backers for the Apex 300 in 2025—proving global trust in our innovation.

Advanced Future Energy Tech System
• BLUE PEAK Innovation Hub: The heart of BLUETTI's hardware and storage breakthroughs.
• BLUE LINK Energy Network: The brain behind smart, seamless energy integration.
• BLUE GRID Power Infrastructure: Scalable, efficient power management for homes and small businesses.
• BLUE LIFE Ecosystem Tech: A lifestyle-focused system that makes sustainable energy part of everyday life.
Together, these technologies deliver unmatched stability, efficiency, and simplicity—powering a smarter, more sustainable world.

The Real Talk
See It to Believe It
Blog Center
Frequently asked questions.
-
-
- Q1: How to choose the right power station for my needs?
- To find the best option for you, simply calculate the power your devices need and choose a power station with the right capacity and output power.
-
- Q2: Are BLUETTI power stations compatible with third-party solar panels?
- Yes, most BLUETTI power stations work with third-party solar panels, as long as they have MC4 connectors and match the input power requirements of the station.
-
- Q3: Do BLUETTI power stations support capacity expansion with modular batteries?
- Absolutely! Modular systems like AC300, AC500, EP800, and EP900, can expand capacity by connecting with additional battery packs, giving you a tailored energy storage solution for your specific needs.
-
- Q4: What warranty services does BLUETTI offer?
- Depending on the model, BLUETTI provides 2 to 10 years of warranty for our products.
-
- Q5: Do BLUETTI products qualify for government incentives?
- You may be eligible for rebates or tax credits. However, please note that BLUETTI does not guarantee any tax credits associated with our products. We recommend checking with your local authorities or consulting a tax advisor for eligibility.
-
- Q6: What products can power my entire home during an outage?
- For whole-home backup during an outage, please consider modular systems like the Apex 300, AC300, AC500, EP800, and EP900. They offer expandable capacity and powerful output to keep your home running smoothly.
-
- Q7: How long can a BLUETTI power station run on a single charge?
- Runtime depends on the power consumption of your devices. You can estimate runtime using the formula: Runtime = Battery capacity × DoD × η ÷ (Load power + Self-consumption of the power station). *DoD refers to Depth of Discharge and η is local inverter efficiency.
-
- Q8: Is it safe to use BLUETTI products indoors?
- Yes! All BLUETTI power stations are emission-free and safe for indoor use.
-
- Q9: How do I maintain my power station?
- Keep it clean, store it in a cool, dry place, and recharge the battery every 3–6 months to ensure optimal performance. For more details, please refer to the user manual.
-
- Q10: Can I use BLUETTI power stations in extreme temperatures?
- BLUETTI power stations are designed to operate within a specific temperature range, typically from -4°F (-20°C) to 104°F (40°C). For the most accurate information, refer to the user manual for the recommended operating temperature for your model. Please note, BLUETTI is not liable for any damage resulting from using the power station outside of the specified temperature range.
-
- Q11: Why is Charger 1 better than a cigarette lighter port?
- A standard 12V cigarette lighter port provides around 100W of power, while a 24V port gives about 200W. Charger 1, however, delivers up to 560W while your vehicle is running, allowing you to charge your power station much faster than with a regular cigarette lighter port.
-
- Q12: Do all BLUETTI power stations support fast charging?
- Yes, thanks to the Turbo Charging technology, our power stations can charge to 80% in about 45 minutes*. *Charging time may vary by model.
-
- Q13: What makes the Elite 200 V2 stand out?
- The Elite 200 V2 is designed for ultra-efficiency, offering 2,600W output, up to 6,000 charge cycles, and exceptional durability—ideal for powering heavy-duty devices.
-
- Q14: How to set up the solar panel for optimal performance?
- -Unfold the solar panel and position it directly under sunlight
-Angle the panel toward the sun for optimal absorption
-Avoid shading from trees or buildings -
- Q15: Why should I use a BLUETTI portable power station with solar panels?
- Pair your BLUETTI power station with solar panels, and you have a solar generator that captures clean, renewable energy from the sun. It's quiet, eco-friendly, and eliminates the noise, pollution, and ongoing fuel costs of traditional gas generators. Perfect for off-grid living, sustainable homes, or anyone looking for reliable, emission-free power, BLUETTI's solar solution is a smarter, greener choice.
-
-
-
- Q1: Why is Charger 1 better than a cigarette lighter port?
- A standard 12V cigarette lighter port provides around 100W of power, while a 24V port gives about 200W. Charger 1, however, delivers up to 560W while your vehicle is running, allowing you to charge your power station much faster than with a regular cigarette lighter port.
-
- Q2: Which BLUETTI power station is best for solar integration?
- Most BLUETTI power stations support fast solar charging (60W-420W), allowing you to access free solar energy efficiently.
-
- Q3: Do all BLUETTI power stations support fast charging?
- Yes, thanks to the Turbo Charging technology, our power stations can charge to 80% in about 45 minutes*. *Charging time may vary by model.
-
- Q4: What's the difference between AC180 and AC200L?
- The AC180 is more compact and portable, with 1,152Wh capacity, while the AC200L offers a larger capacity of 2,048Wh and higher AC output for power-intensive devices.
-
- Q5: What makes the Elite 200 V2 stand out?
- The Elite 200 V2 is designed for ultra-efficiency, offering 2,600W output, up to 6,000 charge cycles, and exceptional durability—ideal for powering heavy-duty devices.
-
- Q6: Is the AC70 suitable for outdoor adventure?
- Yes, the AC70 is lightweight and portable, featuring 716Wh capacity and 700W output, making it perfect for camping, tailgating, and life on the go.
-
- Q7: How to set up the solar panel for optimal performance?
- -Unfold the solar panel and position it directly under sunlight
-Angle the panel toward the sun for optimal absorption
-Avoid shading from trees or buildings
-
-
-
- Q1: How do I bind my device in the BLUETTI app?
- -Download the BLUETTI app from the App Store or Google Play.
-Register an account and bind your device via Bluetooth or WiFi. -
- Q2: What can the BLUETTI app do?
- -Monitor battery status in real-time
-Adjust power settings & schedule operations
-Perform firmware updates remotely -
- Q3: What if I can't connect to the app?
- -Ensure Bluetooth and WiFi are enabled
-Make sure the app is updated to the latest version
-Restart the app and try reconnecting -
- Q4: What devices work with the BLUETTI app?
- The app supports smartphones and tablets with iOS 11.0+ or Android 8.0+.
-
- Q5: Can I bind multiple devices with one BLUETTI account?
- Yes.
-
-
-
- Q1: Can I install BLUETTI power stations by myself?
- Most portable power stations are plug-and-play—no installation needed. However, for home ESS like EP800, EP900, EnergyPro 13K, certified installer is required. Please contact us for more details before you purchase.
-
- Q2: How do I connect solar panels to my power station?
- Use the solar charging cable, which is generally included in the package.
-
- Q3: What tools do I need to install my power station?
- Common tools such as screwdrivers or wrenches may be needed for wall mounts or grid integration. Check the user manual for details. Please note that professional and certified installation is required when installing home ESS.
-
- Q4: What should I do before using my power station for the first time?
- Fully charge the power station using an AC charging cable for optimal battery performance.
-
- Q5: How to expand the capacity of my power station?
- You can expand capacity by adding expansion batteries or connecting extra units in parallel. Check the user manual for more details.
-
- Q6: How to safely install a power station in my RV?
- Secure the unit in a stable, well-ventilated area, and integrate it with your RV's AC and DC systems using compatible connectors.
-
-
-
- Q1: How to protect my power station from overheating?
- Ensure proper ventilation, avoid direct sunlight, and reduce high-load devices.
-
- Q2: How do I reset my power station?
- Turn it off, disconnect all inputs and outputs, and restart after 5 minutes.
-
- Q3: Why can't I charge my power station?
- -Ensure the station is turned on and the charging cable is securely connected
-Check if the input port matches the voltage/wattage requirements
-Try a different outlet or charging method -
- Q4: Why can't my power station charge my devices?
- Ensure the power station and the output port are active, and check if the device's power exceeds the power station's output limit.
-
- Q5: What if my solar panels can't charge the power station?
- Make sure the solar panel's open circuit voltage is compatible with the power station. Then, check the cable connection and ensure the panels are positioned for maximum sun exposure.
-
- Q6: Why does my power station shut down unexpectedly?
- This can happen if the battery is low, the load exceeds the output capacity, or the system is overheating. It's recommended to recharge the station and reduce the load before restarting.
-